Systems that route, support and protect cables through a plant, sourced by size, material, finish and accessories to match your layout.
Cable management keeps cables supported, separated and protected. Trays and ladders carry large numbers of cables on main routes; conduits protect individual circuits; ties and junction boxes finish the installation.
Material and finish follow the environment: pre-galvanised steel indoors, hot-dip galvanised steel outdoors and in humid areas, and stainless steel or GRP where corrosion is severe.
Each line below explains what it is, where it is used, and what to include in your enquiry so we can quote accurately.
Perforated trays support smaller and medium cables with ventilation through the base. Bends, tees, risers and reducers are needed at every change of direction.
Buying noteList straight lengths and fittings separately, with covers if required.
Ladders carry heavy power cables over long spans with good ventilation. Rung spacing and side rail strength determine span and load capacity.
Buying noteGive cable load per metre and support spacing so the ladder is rated correctly.
Conduits protect cables mechanically. PVC suits concealed and light-duty work; GI conduit suits industrial and exposed routes; flexible conduit connects to vibrating equipment.
Buying noteState material, size and total length with bends and couplers.
Cable ties secure cables to trays and bundle wiring. UV-stabilised nylon suits outdoor use; stainless steel ties suit high temperature and corrosive areas.
Buying noteSpecify UV-resistant ties for any outdoor route.
Junction boxes house connections in the field, typically with terminals and gland entries. Material and IP rating follow the location; hazardous areas need certified boxes.
Buying noteState terminal count and gland entries along with size and IP rating.
Typical cable management finishes
Values are typical examples for orientation, not confirmed AMZ Industries stock. Your project specification governs.
| Finish | Typical use |
|---|---|
| Pre-galvanised steel | Dry indoor areas |
| Hot-dip galvanised | Outdoor and humid areas |
| Stainless steel | Corrosive and food areas |
| GRP | Chemical and coastal areas |
Heavy ladders for power routes in dusty environments.
HDG and stainless systems on pipe racks.
Trays and conduits for building services.
Start from the cables and the route.
Cable count, size and weight decide width and type.
Support spacing affects the required strength.
Decides material and finish.
Count every bend, tee and riser from the layout.
AMZ Industries is a sourcing and supply company. We work from your specification, drawing or part number and come back with a clear quotation. If an item cannot be matched exactly, we say so rather than substitute it.
Specification, drawing, part number or a full BOM.
Through our supplier and trading-partner network.
Pricing and lead time, line by line.
Delivered against your confirmed order.
Quick answers about sourcing cable management.
Trays suit smaller cables; ladders suit heavy power cables and long spans.
Yes. A take-off from the layout gives accurate quantities.
Share specifications, quantities or a part list and we will confirm availability, pricing and lead time.
Request a Quote